NOS PRODUITS
Liquid thermal insulation coating
HighHeatCote
HighHeatCote is an advanced silicone-based coating designed to withstand extreme temperatures up to 800 °C (1472 °F). Designed for use in harsh industrial environments, it provides excellent thermal protection as well as durability against oxidation, thermal shock, and severe weather conditions. The highly effective formula ensures long-lasting adhesion to metal surfaces even when exposed to high temperatures on a continuous basis. Whether used on power plant piping, industrial furnaces, or exhaust systems, HighHeatCote creates a durable barrier that extends component life and reduces maintenance frequency. Ideal for industries such as power generation, petrochemicals, metallurgy, and heavy machinery, this reliable solution is designed for equipment operating in harsh thermal conditions.
Liquid thermal insulation coating
Composition:
HighHeatCote is a High Temperature Thermal Insulation coating. It is designed to control heat transfer for the surface with the temperatures between 200°C and 800°C. It is water-based and extremely light in appearance. HighHeatCote uses a special organosilicate bond with a silicon-ceramic filler to provide a non-conductive block against heat transfer.
HighHeatCote is an environmentally friendly, nonflammable and non-toxic product for use on high-temperature surfaces in standard and super-steam pipes or furnace walls.
HighHeatCote is easy to apply with a texture sprayer and can be applied to metal, concrete, wood and other substrates.
Key Benefits
- Thermal resistance up to 800°C / 1472°F
- Excellent adhesion on metal, steel, cast iron, and prepared surfaces
- Easy application by brush, roller, or spray
- Fast drying: tack-free in 1 hour, fully cured in 7 days at room temperature
- Low VOC – Compliant with environmental regulations
Application Instructions
- Surface Prep: Clean, dry metal surface, sandblasted or abraded.
- Application: Stir thoroughly. Apply using spray gun, roller, or brush.
- Ideal Conditions: Temperature above 150°C, relative humidity below 85%.
- Drying Time: 1 hour tack-free, 24 hours handle-ready
Technical Specifications
- Color: light tan
- Finish: matte
- Maximum Service Temperature: 800°C (1472°F)
- Coverage: 25.6 sq. ft./gallon = 50 mil dry film thickness
- Recommended dry film thickness: 2–120 microns per coat
- Packaging: 20l/5gallons
Surface preparation:
- Clean surface of dirt and grease.
- Prime surfaces before application, especially metal.
- Mix contents until homogeneous.
- Add up to 100 ml of water per liter if necessary.
Application methods :
- Apply by brush, roller or spray gun (wet film thickness 0.8 to 1.2 mm).
- Protect from rain until completely dry.
- Drying time: 3 hours for 1 mm thickness at 20°C and 60% humidity.
Follow instructions for optimum application and durability.
Maintenance:
- In case of damage, sand surface, apply primer and recoat.
- Easy to clean wet coat with water.
Security and Recycling:
- This product is classified as non-hazardous. However, it is important to observe all safety precautions.
- Do not dispose of this product in the environment.
- For further information on disposal, consult your local waste management authority.
Safety precautions :
- Personal protection: Use gloves, goggles and appropriate clothing when applying.
- Avoid inhalation of vapours. Apply in well-ventilated areas.
- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice if necessary.
- If swallowed, seek medical advice immediately and do not induce vomiting.
- Store away from frost and excessive heat (5–30°C).
- Flammablility: Non-flammable
- Safety Data Sheet (SDS) available upon request.
Care and Cleaning :
- Clean tools with soapy water immediately after use.
- Do not discharge residues into drains or watercourses.
Storage and Keeping :
- Store in tightly closed original container.
- Store in a cool, dry, well-ventilated place away from frost and direct sunlight.
- Shelf life: 12 months under optimal storage conditions.