NOS PRODUITS

The ultra-performing waterproofing solution for your surfaces.

AquaCote

AquaCote is a liquid waterproofing coating based on a polyurethane-modified acrylic dispersion. It provides effective protection against moisture, weathering, and cracks, while being easy to apply cold. Available in 5 kg, 10 kg, and 20 kg buckets, AquaCote should be stored in a dry place at temperatures between +5°C and +30°C, protected from frost and sunlight. It can be stored for up to 12 months under optimal conditions.

The ultra-performing waterproofing solution for your surfaces.

Composition:

AQUACOTE coating acts as a cold-applied, highly elastic, ultraviolet-resistant, single-component liquid waterproofing membrane. Suitable for warm-climate environments.

Features:

  • Application: 2 coats minimum (up to 0.5 kg/m² per coat without reinforcement)
  • Consumption: 1.0 kg/m² – 2.1 kg/m² depending on project requirements
  • Density: ~1.3 kg/l (EN ISO 2811-1)
  • VOC: < 100 g/l
  • Composition: Polyurethane-modified acrylic dispersion
  • Packaging: 5, 10, 20 kg pails
  • Shelf life: 12 months (storage in original, sealed packaging)
  • Storage temperature: +5°C to +30°C (protect from sunlight and frost)
  • Colors: White and gray, liquid form

Compatible substrates :

  • Plasterboard, plywood, concrete, concrete blocks, plaster, cement and gypsum screeds, masonry, aerated concrete, cement, brick, stone, metal, existing bituminous membranes.

Advantages :

  • UV- and weather-resistant
  • High elasticity and crack-bridging capacity
  • Non-toxic, water-based, ready-to-use
  • Excellent adhesion to porous and non-porous substrates
  • Cold application, no heat required
  • Fully bonded, seamless membrane

Caution: Follow manufacturer’s recommendations for safe and effective use.

Application precautions:

  • Do not apply to mastic asphalt, old ceramics or paint.
  • Apply to clean, prepared surfaces.

Safety and Recycling :

  • This product is classified as non-hazardous. However, it is important to observe the usual precautions.
  • Do not dispose of this product in the environment.
  • For further information on disposal, consult your local waste management authority.

Safety precautions :

  • Personal protection: Use gloves, goggles and appropriate clothing when applying.
  • Avoid inhalation of vapours. Apply in well-ventilated areas.
  • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice if necessary.
  • If swallowed, seek medical advice immediately and do not induce vomiting.

Care and Cleaning :

  • Clean tools with soapy water immediately after use.
  • Do not discharge residues into drains or watercourses.

Storage and Keeping :

  • Store in tightly closed original container.
  • Store in a cool, dry, well-ventilated place away from frost and direct sunlight.
  • Shelf life: 12 months under optimal storage conditions.

Download EposiliCote data sheets

This product is exclusively manufactured for Loranger Coatings at the production facilities of the company FOP Blokhina A.A. and certified according to CN 1504-2.
FOP Blokhina A.A. Ukraine 65013, Odessa, Chornomorskoho Kazachestva Str., 80 Phone: +38 0673236620 E-mail: lesmalux@bigmir.net