Thermal insulation coating

Bronya Standard & Standard NF

A special available version of the Bronya Classic modification – identical thermophysical characteristics, but limiting the maximum temperature to + 140 ° С.

[ninja_form id=3]

Bronya Standard ultra-thin thermal insulation 

Bronya Standard liquid thermal insulation – the budget version of the Bronya Classic modification – has the same thermophysical characteristics (absolutely identical in terms of the amount and volume of microspheres produced by “3M”), but has a limitation of the maximum temperature of maximum operation of + 140 ° С.

Bronya Standard thermal insulation coating, weather resistant, not vapor permeable.

It is very effective in thermal insulation of hot and cold water supply pipelines, steam pipelines, air ducts for air conditioning systems, cooling systems, various containers, tanks, trailers, refrigerators, etc It is used to eliminate condensation on cold water supply pipelines and reduce heat loss in accordance with SNiP in heating systems. Operation at temperatures from –60°C to +140°. The service life of the material is 15 years. 
A plastic euro bucket of 20 liters of Bronya Standard heat-insulating paint weighs only 9.5 kg. During transportation and storage, Bronya liquid thermal insulation practically does not break into fractions. Competitors’ outdated recipe is limited to components from the last century and cannot yield similar results – chemistry has advanced very far in recent years and our hand is on the pulse. 

Download the Bronya Standard Manual

Download the Bronya Standard NF Manual

Request a free sample and view our listed specifications! 
You can familiarize yourself with the Bronya Standard instructions in the Technical Documentation section.

Bronya Standard NF ultra-thin thermal insulation

Modification Bronya Standard NF, identical in form of release and packaging, with a low-fuel (basic) modification. 

Important notification

To date, we are not aware of non-combustible (NF) thermal insulating coatings similar and having a thermal conductivity of 0.001 identical to our basic modifications – complete competing analogues of these modifications from other manufacturers of thermal insulation products. 
But on the market there are:

  • Non-combustible coatings with an NF certificate, including those from manufacturers of thermal insulation materials with some (or no) thermophysical effect, offering to apply on their basic (G1) modifications (moreover, without confirmation of the thermal conductivity) in order to supposedly obtain a final thermal insulation coating with NF certification
  • NF certified thermal insulation material, but whose declared thermal physics is 2 to 8 times greater than “one thousandth” (essentially without any legitimate proof of thermal conductivity)

Important! The Bronya Standard NF modification is more affordable than the Bronya Classic NF modification by an average of 10%

Bronya Standard Features Chart

Indicator Unity Quantity
Coating appearance Smooth and uniform matte white film
The resistance of the coating to temperature drops from -40 ° С to +60 ° appearance of the coating Without changes
Durability of concrete and metal surfaces in a moderately cold climatic region Years Not less than 15
Coefficient of thermal conductivity of the material W / m ° C 0,0012
Vapor permeability coefficient of the material mg / m h Pa 0,003
Surface temperature during material application ° C From +7 to +120
Operating temperature ° C From -60 to +140
Material density at a temperature of 20°C kg / m3 600 ± 10%
Mass fraction of volatile substances, not more % 43
pH of material pH 7,5-11,0
Drying time and film formation at a temperature of (20 ± 2) ° С, not less h 24
Adhesion of the coating by peel force, no less

  • To concrete and brick surfaces
  • To steel
MPa 1,3
Coating resistance to static shock at a temperature of (20 ± 2) ° С, not less: 

  • The water
  • 5% NaOH solution
Appearance of the coating No change

No change

Coating resistance to temperature (200 ± 5) ° С Coating appearance No change