Bronya Light & Light NF

Today, we do not know of non-combustible (NF) thermal insulating coatings similar and having a thermal conductivity of 0.001 identical to our basic modifications – complete competing analogues of these modifications from other manufacturers of thermal insulation material. 
 
But on the market there are:

• Non-combustible coatings with an NF certificate, including those of manufacturers of thermal insulation materials with a certain (or without) thermophysical effect, offering to apply on their basic (G1) modifications (by the way, without confirmation of thermal conductivity ) in order to supposedly obtain a final thermal insulation coating with NF certification.
• NF certified thermal insulation material, but whose declared thermal physics is 2 to 8 times greater than “one thousandth” (essentially without any legitimate proof of thermal conductivity).

Thermal and acoustic insulation Bronya Light NF 

Modification Bronya Light NF, identical in the form of release and packaging, with a low-fuel (base) modification.

Learn more about the Bronya Light modification

Bronya Light is non-toxic, does not contain harmful volatile compounds and is also completely safe for allergy sufferers, which is confirmed by the conclusion of the sanitary-epidemiological examination issued by the FBU Healthcare Center for Hygiene and Epidemiology in Moscow.

Heat and sound insulation Bronya Light has 4 forms of clearance:

The special composition of heat and sound insulation Bronya Light allows you to perform plastering and heat insulation work on the facades of buildings and structures at the same time, which reduces labor costs and shortens working time. Bronya Light thermal insulation coating has high adhesion, vapor permeability, weather resistance and durability.

The use of Bronya Light thermal insulation coating in industrial premises and workshops allows to increase the energy efficiency of the enterprise and reduce the costs of heating or cooling the premises, which will reduce production costs and improve work conditions. The ability to use on equipment used in marine navigation.

Distinctive characteristics of Bronya Light.

A distinctive feature of Bronya Light from other modifications of the Bronya series is:

• The use of thermal insulation coating is more cost-effective (to solve the problems of additional insulation) than almost any insulation, because the cost of Bronya Light is proportional to that of ordinary plaster mixes.
• Application on surfaces where it is necessary to solve the problem of light insulation (to eliminate the effect of a cold wall, frost or condensation in severe frosts), as well as where the thermophysical properties would require less than 1 mm of Bronya thermal insulation (Facade or Classic).
• Applications in multi-layer enveloping structures, with the possibility of applying any construction material on our coating
• Simultaneously perform puttying and thermal insulation work, which will significantly reduce labor costs
• Possibility of application by coating machines and high-pressure airless spraying devices; Layer thickness up to 3 mm in one pass; Mixing with a construction mixer at any speed is permitted
• Layer thickness up to 3 mm in one pass
• Mixing with a construction mixer at any speed is permitted;  

What could not have been done before is now possible with Bronya Light!!!  

1. Thermal insulation of floors according to the warm floor system.

Thermal insulation of floors according to the warm floor system. Standard methods of underfloor heating installation require insulation between the floor slab and the heating elements of the system, which significantly increases the thickness of the cake. Now you no longer need to use standard insulation materials, which eventually lose their strength and shrinkage, Bronya Light is able to perform thermal insulation work better than any other material and significantly reduce the thickness of the warm ground. Bronya Light will create a thermal barrier, preventing the entry of cold from the outside and reflecting the heat coming from the heating system. 

2. Building walls will be insulated and coated in one step with Bronya Light.

Building walls will be insulated and coated in one step with Bronya Light. Insulating the walls of buildings is a rather complicated and time-consuming process, which cannot always be achieved with traditional building materials, which are noisy and require additional labor during installation. All decorative materials such as wallpaper, paints, decorative plasters, tile adhesive, etc. can be applied over Bronya Light coating

3. Roof insulation.

Bronya Light allows you to insulate the roofs of buildings and structures using materials that do not weigh down the structure and at the same time create a thermal barrier from the external environment. Thus, there is no heat loss, internal icing, condensation and “ice formation” during the cold period, and heating during the hot period is significantly reduced.

Visual experiences demonstrating the quality of Bronya Light thermal and acoustic insulation:

1. Apply 3mm thick heat insulation to half of the electric stove, after completely dry, turn it on. Place a block of ice and your hand on an insulated and uninsulated surface and you will see and feel the difference.

2. You can also carry out a simple experiment – apply Bronya Light, for example, to a brick on one side with a thickness of only 1 mm, then after drying, take the brick in your hands from 2 sides (covered and not ) and notice how the heat transfer has changed (the coated side takes less heat from your hand). The same thing happens with the wall of the room.

3. Bronya Light Coating is applied to the surface of the drywall, half of the drywall is left uninsulated to better visualize the insulation possibilities. The plasterboard is placed inside the freezer with the treated side down, after which the chamber is cooled and the readings of the measuring instruments are taken. This experiment makes it possible to reproduce the real operating conditions of the enclosure structures of buildings and structures. The temperature in the freezer drops to -18°C, after which readings are taken on an insulated and uninsulated surface.

According to experience:

Bronya Light in building insulation